Product Search
Search results for 'T-162'
Showing 41 - 61 of 563 Total Results
4" Lightweight Retainer Rings (2)
CA-0200-L
Location: Unbonded Capping (Retainers and Pad Caps)
Aluminum retainer rings are 35% lighter than steel caps to reduce fatigue. They are heat-treated and hard anodized for longer wear and durability and conform to ASTM C-1231 specifications.
(3) options
Location: Test Platens
Models available for testing 12” (305 mm) and 8” (203 mm) wide masonry units. . Both models feature large diameter spherical disk and seat assemblies, and platen bearing surface plane to .001” (.025 mm) in any 6” (152 mm) direction, through hardened to HRC 60 and plated for wear and corrosion...
Magnet Holder with Swivel Adapter Yoke
SA-2021
Location: CBR Accessories
Convenient, portable method of mounting dial indicators. Holder's Alnico magnetic base mounts on flat or curved metallic surfaces. Indicator can me mounted in almost any position.
CA-3210
Location: Water/Cement Ratio
The Cementometer is used for rapid determination of the moisture content of fresh cement and concrete, available from Test Mark Industries.
SA-0210
Location: Sand Density
The Density Plate provides a flat, stable base for the sand cone apparatus - available from Test Mark Industries.
Blaine Air Permeability Apparatus
CA-2970
Location: Blaine Air Permeability
The Blaine Air Permeability Apparatus from Test Mark determines the fineness of Portland cement on terms of specific surface expressed as total surface area in square centimeters per gram of cement.
CA-3128
Location: Vicat Apparatus
The Brass Mold from Test Mark is used with the Modified Vicat Apparatus for Consistency and Set Time.
(3) options
Location: Round Pans/Mixing Bowl
Test Mark supplies round pans and mixing bowls for laboratory use in materials testing applications.
ES Series Low Profile Bench Scale
Location: ES Series Low Profile Bench Scale
SC-0360 Series Bench Scale from Test Mark features easy two button operation, stability indicator, auto-zero tracking, AC adapter (included).
CA-1430
Location: Bench Ovens
These bench ovens are used for curing, drying, and baking. Ovens feature high density insulation for reduced heat loss and efficient operation, adjustable shelves on 1 1/2" centers, gasketed doors, and scratch resistant finish. 7.0 cu. ft., 300ºF model.
CA-1420
Location: Bench Ovens
These bench ovens are used for curing, drying, baking. Ovens feature high density insulation for reduced heat loss and efficient operation, adjustable shelves on 1 1/2" centers, gasketed doors, and scratch resistant finish. 7.0 cu. ft., 437ºF model.
Bench Oven, 10.6 cu. ft. 437ºF
CA-1440
Location: Bench Ovens
These bench ovens are used for curing, drying, and baking. Ovens feature high density insulation for reduced heat loss efficient operation, adjustable shelves on 1 1/2" centers, gasketed doors, and scratch resistant finish. 10.6 cu. ft. model.
Exhaust Chamber for Bench Oven
CA-1425-04
Location: Ovens & Hot Plates
Exhaust chamber adapter is available for processing material where undesirable fumes are present. Encloses the oven exhaust and allows venting into a standard 3" (76 mm) stove pipe.
CA-1992
Location: Wet Washing Sieve
The stainless steel mesh cement washing sieve features nickel-plated brass frame and legs for support when drying.
(4) options
Location: Centrifuge Extractors
Centrifuge Extractors from Test Mark are designed for use in the separation of asphaltic mixtures to determine bitumen percentage.
CA-3010
Location: Flow Tables
Motorized flow tables from Test Mark Industries are used to determine consistency of cement mortars. Features a 10-inch dia. cast bronze table.
CA-2950
Location: Comparator, Length Change
The Comparator from Test Mark Industries measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
Test Mark Industries is a manufacturer and supplier of construction materials testing equipment used for testing concrete, cement, aggregates, asphalt and soil samples to ASTM and AASHTO standards.
CA-0286
Location: Cube Molds
The 2-inch cube maker molding system from Test Mark uses watertight polypropylene liners which fit into a 3-gang metal mold frame.
CA-2710
Location: Specific Gravity & Absorption Fine Aggregates
Test Mark's pycnometer is used to determine specific gravity of fine aggregates. Easy online ordering.
